New  Shine Compatible Arduino Leonardo Projects

New Shine Compatible Arduino Leonardo Projects

  • Brand : New Shine
  • Product Code : NS-031
  • Availability : 10
This product has a minimum quantity of 100

New  Shine Compatible Arduino Leonardo Projects


Product Description:

The Leonardo is Arduino's first development board to use one microcontroller with built-in USB. Using the ATmega32U4 as its sole microcontroller allows it to be cheaper and simpler. Also, because the 32U4 is handling the USB directly, code libraries are available which allow the board to emulate a computer keyboard, mouse, and more using the USB-HID protocol!.

It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

Overview:

The Arduino Leonardo is a microcontroller board based on the ATmega32u4 (datasheet). It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

The Leonardo differs from all preceding boards in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Leonardo to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port. It also has other implications for the behavior of the board; these are detailed on the https://www.arduino.cc/en/Guide/ArduinoLeonardo

Summary:

2016 Arduino Leonardo Product Details Specifications
Microcontroller.ATmega32u4.
Operating Voltage.5V
Input Voltage((recommended)7V~12V
Input Voltage(limits)6V~20V
Digital I/O Pins20
PWM Channels7
Analog Input Channels12
DC Current per I/O Pin40mA
DC Current for 3.3V Pin50mA
Flash Memory32KB (ATmega32u4) of which 4 KB used by bootloader
SRAM2.5 KB (ATmega32u4)
EEPROM1 KB (ATmega32u4)
Clock Speed16 MHz

Power:

The Arduino Leonardo can be powered via the micro USB connection or with an external power supply. The power source is selected automatically..

External (non-USB) power can come either from an AC-to-DC adapter (wall-wart) or battery. The adapter can be connected by plugging a 2.1mm center-positive plug into the board's power jack. Leads from a battery can be inserted in the Gnd and Vin pin headers of the POWER connector.

The board can operate on an external supply of 6 to 20 volts. If supplied with less than 7V, however, the 5V pin may supply less than five volts and the board may be unstable. If using more than 12V, the voltage regulator may overheat and damage the board. The recommended range is 7 to 12 volt

Note: HTML is not translated!
    Bad           Good